News
SpaceX will host Hyperloop Pod Competition next week, Jan 27-29, 2017
Get ready to see Hyperloop concept pods fire through the 1-mile test track located outside of SpaceX and Tesla’s Design Studio in Hawthorne, California, next week between January 27-29. Elon Musk and SpaceX first unveiled the idea for a new high-speed ground transport system called the Hyperloop on August 12, 2013 with the publication of a white paper, the Hyperloop Alpha Preliminary Design Study. SpaceX’s sponsored Hyperloop Pod Competition is an incentive prize competition created to inspire university students and independent engineering teams to design and build a subscale prototype transport vehicle (a “Hyperloop pod”) that will demonstrate technical feasibility of various aspects of the high speed transportation concept. To support this competition, SpaceX has constructed a test track outside of its headquarters which we had the opportunity to see during early construction last year.
There are three judging phases in the Hyperloop Pod competition: a design competition that was held in January 2016 and an on-track competition to be held January 27–29, 2017 (Competition Weekend I), followed by a Summer 2017 (Competition Weekend II). The original specification for the Competition Basic for the Design Weekend and the competition Weekend I, though no longer available at SpaceX, can still be found online.
DESIGN WEEKEND
The Design weekend was held in January 2016 at Texas A&M University. Awards were given in three categories:
SUBSYSTEM
Best Overall Subsystem Award: Auburn University | Auburn University Hyperloop Team.
DESIGN ONLY
Top Design Concept Award: Universitat Politècnica de Valencia | Makers UPV Team
DESIGN AND BUILD CATEGORY OVERALL
Massachusetts Institute of Technology | MIT Hyperloop Team
MIT Hyperloop Team’s design was awarded the “Best Overall Design Award”, among the 23 designs selected to move to the prototype stage. The design proposes a 250 kg (551 lb) pod with a carbon fiber and polycarbonate sheet exterior. It is elevated by a passive magnetic levitation system comprising 20 neodymium magnets that will maintain a 15 mm (0.6 in) distance above the track. The team says with air pressure at 140 Pascals, the pod could accelerate at 2.4 G and have 2 Newton aerodynamic drag when traveling at 110 m/s. The design includes a fail-safe braking system that automatically halts the pod should the actuators or computers fail, and low speed emergency drive wheels that can move the pod 1 m/s. Delft Hyperloop received a “Pod Innovation Award”, while Badgerloop at University of Wisconsin, Madison, Hyperloop at Virginia Tech, and HyperXite at UC Irvine each received a “Pod Technical Excellence Award.” The full list of Awards and news clips from the Design Weekend can be found at the Texas A&M University Engineering web site. Besides the winning teams, several other teams were invited to compete in the upcoming Competition Weekend I from the Design and Build category:
- rLoop (Non-student team)
- University of Waterloo | uWaterloo Hyperloop
- University of Washington | UWashington Hyperloop
- University of Toronto | University of Toronto
- University of Maryland and Rutgers University | RUMD Loop
- University of Florida | GatorLoop
- University of of Colorado, Denver | Team HyperLynx
- University of Cincinnati | Hyperloop UC
- University of California, Santa Barbara | UCSB Hyperloop
- University of California, Berkeley | bLoop
- Texas A&M University | TAMU Aerospace Hyperloop
- Technical University of Munich | WARR Hyperloop
- Purdue University | Purdue Hyperloop Design Team
- Oral Roberts University | Codex
- Lehigh University | Lehigh Hyperloop
- Keio University | Keio Alpha
- Drexel University | Drexel Hyperloop
- Carnegie Mellon University | Carnegie Mellon Hyperloop
In February 3, 2016 eight more teams advanced to Competition Weekend I.
- Cornell University + Harvey Mudd College + University of Michigan + Northeastern University + Memorial University of Newfoundland(Canada) + Princeton University | OpenLoop
- Louisiana State University | Bayou Bengals
- New York University | NYU Hyperloop
- RMIT University | VicHyper
- John’s High School | HyperLift
- University of Illinois at Urbana-Champaign | Illini Hyperloop
- University of Southern California | USC Hyperloop
- University of Wisconsin, Milwaukee | Mercury Three
In the end, 30 of the 115 teams that submitted designs in January 2016 were selected to build hardware to compete in Competition Weekend I. There were more than 1,000 applicants at earlier stages of the competition.
JUDGING CRITERIA
Originally, the second Phase of the competition was supposed to involve competitive runs in the Hyperloop test track to be awarded based on various classes (fully functional pod, susbsystem test pod, etc.) and pod mass. This phase of the competition was renamed“Competition Weekend I,” when SpaceX added a third phase of the competition, Competition Weekend II. The original SpaceX Hyperloop Pod Competition – Rules and Requirements for Weekend I can be seen at the end of this article. We’ve embedded a copy of the original document from SpaceX.
The Judging Criteria are listed in the document, and involve scoring in 4 different categories, for a maximum overall total of 2500 points.
- Category 1: Final Design and Construction (500 points)
- Category 2: Safety and Reliability (500 points)
- Category 3: Performance in Operations (500 points)
- Category 4: Performance in Flight (1000 points)
Competition Weekend I Judging Criteria – Source: SpaceX
HYPERLOOP TEST TRACK
AECOM, a company that has designed and built some of the world’s most impressive transportation systems, was selected to design and build the world’s first Hyperloop test track as part of the pod competition hosted by SpaceX
SpaceX Hyperloop Test Track (Jan.7, 2017) [Source: Teslarati via Marco Papa]
The track is a straight one-mile run on Jack Northrop Avenue, between Crenshaw Blvd. and Prairie Ave. The SpaceX Hyperloop test track — or Hypertube — was designed in 2015 and was constructed in the fall 2016, reaching its full length of one mile by October 2016. The test track’s six-foot diameter steel tube includes a non-magnetic sub-track and said to be capable of achieving 99.8 percent vacuum. The test track itself is also a prototype, where SpaceX anticipates learning from the design, build process and evaluates how to apply automated construction techniques to future Hyperloop tracks.
The Hypertube test track is designed to enable competitors who implement a wide array of designs and build pods that will test a variety of subsystem technologies that are important to new vehicle transport systems. This will include Hyperloop-specific pods—with air-bearing suspension and low-pressure compressor designs—as well as wheeled vehicle and magnetic levitation rail designs that will support a wide array of vehicle technologies to be tested. While the Design Weekend held at Texas A&M University was open to the public, it is unclear if the Competition Weekend I will be as well, or if it will be an invitation only event like many of the SpaceX and Tesla events. Several inquiries for tickets posted to the Twitter account of the Hyperloop Pod Competition went unanswered. The Official SpaceX Hyperloop Pod Competition page does not shed any light on who will be able to attend either.
HYPERLOOP POD COMPETITION II
According to SpaceX, “based on the high-quality submissions and overwhelming enthusiasm surrounding the competition, SpaceX is moving forward with a second installment of the competition: Hyperloop Pod Competition II, which will culminate in a second competition in Summer 2017 at SpaceX’s Hyperloop test track. Hyperloop Competition II will be focused on a single criterion: maximum speed. The second competition is open to new student teams interested in competing on the test track, as well as to existing student teams who have already built and tested Pods to further refine their designs.” The Competition Weekend II event will be held in the Summer 2017 at the same SpaceX Hyperloop test track.
[pdf-embedder url=”http://www.teslarati.com/wp-content/uploads/2017/01/spacex-hyperloop-competition-rules.pdf”]
Elon Musk
Tesla FSD mocks BMW human driver: Saves pedestrian from near miss
Tesla FSD anticipated a BMW driver’s lane drift before the human behind the wheel could react.
A video posted to r/TeslaFSD this week put a sharp spotlight on Tesla’s Full Self-Driving (FSD) software being able to react to pedestrian intent than an actual human driver behind the wheel. In the Reddit clip, a BMW driver can be seen rolling through a neighborhood street completely unaware of a pedestrian stepping in to cross. At the same time, a Tesla driving on FSD had already begun slowing down before the pedestrian even began their attempt to cross the street The BMW kept moving, prompting the pedestrian to hop back, while the Tesla came to a stop and provide right-of-way for the human to safely cross.
That gap between what the BMW driver saw and what FSD had already processed is the story. Tesla FSD wasn’t reacting to a person in the street, rather it was reading the signals that a person was about to enter it based on the pedestrian’s movement, trajectory, and their trajectory to telegraph intent.
Tesla’s FSD is now built on an end-to-end neural network trained on billions of real-world miles, learning to interpret subtle human behavioral cues the same way an experienced human driver does instinctively. The difference is consistency. A human driver distracted for two seconds misses what FSD does not.
Tesla sues California DMV over Autopilot and FSD advertising ruling
Reddit commenters in the thread were blunt about the BMW driver’s failure, with several pointing out that the pedestrian was visible well before the crossing. One response put it plainly that the car on FSD saw the situation developing before the human in the other car had registered there was a situation at all.
Tesla has published data showing FSD (Supervised) is 54% safer than a human driver, accumulated across billions of miles driven on the system. Elon Musk has said FSD v14 will outperform human drivers by a factor of two to three, and that v15 has “a shot” at a 10x improvement. Pedestrian safety is where the stakes are highest, and where intent prediction closes the gap fastest. At 30 mph, a car covers roughly 44 feet per second. An extra second of awareness from reading a person’s body language rather than waiting for them to step out is often the difference between a near miss and a fatality.
Video and community discussion: r/TeslaFSD on Reddit
FSD saves man from becoming a pancake. BMW driver nearly flattens him.
by
u/Qwertygolol in
TeslaFSD
News
Tesla Robotaxi gets a small but significant change
In the world of Tesla, where billion-dollar battery breakthroughs and autonomy milestones dominate headlines, a quiet design update can still pack a punch.
In the world of Tesla, where billion-dollar battery breakthroughs and autonomy milestones dominate headlines, a quiet design update can still pack a punch.
Last week in downtown Austin, sharp-eyed observers spotted a subtle but telling evolution on the Cybercab: a new “ROBOTAXI” logo graphic now graces the vehicle’s doors at Tesla’s Autonomy Popup.
What looks at first glance like a minor stylistic choice is, in fact, a deliberate rebranding move that hints at how the company envisions its robotaxi fleet fitting into everyday life.
The updated lettering is bold, graffiti-inspired, and unapologetically street-smart. Rendered in black with dripping white accents and a glowing yellow outline, the font evokes urban energy and playful irreverence.
Live From Downtown Austin:
Tesla Cybercab with new logo Graphic at their Autonomy Popup pic.twitter.com/MTTb9KDr3b
— David Moss (@DavidMoss) March 13, 2026
Gone is the sleek, minimalist typography that defined earlier Cybercab prototypes. In its place is something more human, almost rebellious.
The new logo pops against the Cybercab’s smooth, metallic body, turning the autonomous pod into a rolling piece of public art rather than just another futuristic taxi.
Designers know that fonts are silent brand ambassadors. They shape perception before a single ride is taken. Tesla’s classic sans-serif aesthetic screams precision engineering and Silicon Valley cool.
The new Robotaxi script leans into accessibility and fun, suggesting the vehicle is approachable, not intimidating. For a product meant to ferry strangers through city streets 24/7, that matters. It signals that the robotaxi isn’t reserved for tech elites; it’s for everyone.
Tesla Cybercab spotted next to Model Y shows size comparison
The timing is no accident. With regulatory approvals for unsupervised autonomy advancing and Tesla preparing to scale Cybercab production, the company is shifting from prototype showcase to fleet deployment.
A fresh logo helps differentiate the vehicles visually in dense urban environments—crucial for rider recognition and brand recall. It also aligns with Elon Musk’s long-standing ethos: make the future feel exciting, not sterile.
Small changes like this often foreshadow a larger strategy. Tesla has always obsessed over details—door handles, screen interfaces, even the curvature of a steering wheel.
Updating the Robotaxi font reflects the same meticulous care now applied to consumer-facing autonomy. It’s not just paint on metal; it’s a statement that the ride of the future should feel personal, memorable, and undeniably cool.
In an industry racing toward self-driving fleets, Tesla’s willingness to evolve even the smallest visual cues shows confidence. A font won’t launch the robotaxi network, but it might just help millions climb aboard with a smile.
News
Tesla makes latest announcement on Model S and Model X
The announcement follows Tesla CEO Elon Musk’s statement on the Q4 2025 earnings call in late January. Musk described the decision as an “honorable discharge” for the two vehicles, noting that production would wind down in Q2 2026.
Tesla has officially begun winding down production of its flagship Model S and Model X in the United States, notifying owners via email that the long-running models will soon reach the end of the line.
The email, sent to U.S. customers on March 27, opens with gratitude. “Model S and Model X marked the beginning of the world’s transition to electric transportation,” it reads. “These vehicles also made it possible for Tesla to develop the technology that would move our world toward autonomy.”
It then delivers the news directly: “As we make way for this autonomous future, Model S and Model X production will be ending. If you’d like to bring home a new Model S or Model X, order yours soon from our limited inventory.”
Tesla just sent out a new email thanking Model S/X owners.
“These vehicles made it possible for Tesla to develop the technology that would move our world toward autonomy. As we make way for this autonomous future, Model S and Model X production will be ending. If you’d like to… pic.twitter.com/IeUhZ3iDnX
— Sawyer Merritt (@SawyerMerritt) March 27, 2026
The message closes with a simple thank-you: “Thank you for being part of our journey.”
The announcement follows Tesla CEO Elon Musk’s statement on the Q4 2025 earnings call in late January. Musk described the decision as an “honorable discharge” for the two vehicles, noting that production would wind down in Q2 2026.
The move frees factory floor space at Fremont, California, for next-generation manufacturing, including Optimus humanoid robots and the upcoming Robotaxi platform.
Introduced in 2012 and 2015, respectively, the Model S and Model X were Tesla’s original halo cars. They proved EVs could outperform gasoline luxury vehicles in acceleration, range, and tech features while pioneering over-the-air updates and early autonomy hardware.
Although they never matched the volume of the Model 3 and Model Y, their engineering breakthroughs laid the foundation for the company’s current lineup and full self-driving development.
Early adopters highlighted how the cars convinced them to invest in Tesla stock and the EV movement. Some U.S. owners who had not yet received the note voiced mild frustration, and international customers confirmed the outreach remains U.S.-only for now.
Tesla has not detailed an exact final production date beyond the Q2 2026 target or confirmed immediate replacements. Speculation continues about a possible Cybertruck-derived SUV, but the company’s public focus has shifted squarely to autonomy and robotics.
For buyers still interested in the S or X, the window is closing. Inventory is described as limited, and Tesla’s Korean division has already set a March 31 cutoff for new orders in that market. The email serves as both a farewell and final sales push, an elegant close to a chapter that helped define modern electric driving.
Tesla FSD mocks BMW human driver: Saves pedestrian from near miss
Tesla Robotaxi gets a small but significant change
Tesla makes latest announcement on Model S and Model X
Elon Musk says Tesla is developing a new vehicle: ‘Way cooler than a minivan’
Elon Musk launches TERAFAB: The $25B Tesla-SpaceXAI chip factory that will rewire the AI industry
